Milling machine (SOLD)
Item ID
405
Category
Coal & Ash Handling Equipment
Model Number
1969
Asset ID
09K-050
Manufacturer
Industrias Anayak
Condition Code
Used needs repairs
UOM
Each
Quantity
0
Division
AEP - Ohio
Equipment Location
CARDINAL PLANT - BRILLIANT , OH
Condition Code
Used needs repairs
Short Equipment/Material Description
Millling Machine
Industrias Anayak milling machine
Model - 1969
Supply voltage, 3 phase, 60 herz. = 57.5
Amps. (full load current of all motors & equipment) = 5.50
Ampere rating of spindle motor = 3.40
Ampacity (minimum) of supply circuit conductors = 4
Ampere rating (maximum) of supply circuit overcurrent device = 6.16
H.P. rating of supply disconnect device = 3.85
Some of the gears are worn. When using the dial indicators, they are not true to the settings on the dial gage.
The weight of the machine is estimated to be approximately 2 tons. Keep in mind this is only an estimate.
The Buyer will be responsible for providing all equipment necessary to load the milling machine onto Buyer's trailer. AEP will NOT assist will loading.
The milling machine is being sold "as is, where is".
Model - 1969
Supply voltage, 3 phase, 60 herz. = 57.5
Amps. (full load current of all motors & equipment) = 5.50
Ampere rating of spindle motor = 3.40
Ampacity (minimum) of supply circuit conductors = 4
Ampere rating (maximum) of supply circuit overcurrent device = 6.16
H.P. rating of supply disconnect device = 3.85
Some of the gears are worn. When using the dial indicators, they are not true to the settings on the dial gage.
The weight of the machine is estimated to be approximately 2 tons. Keep in mind this is only an estimate.
The Buyer will be responsible for providing all equipment necessary to load the milling machine onto Buyer's trailer. AEP will NOT assist will loading.
The milling machine is being sold "as is, where is".
