Temporary Conveyor System With Pad Mount Transformer (SOLD)

Item ID 3132
Category Coal & Ash Handling Equipment
Model Number
Serial Number
Asset ID 19P-447
Manufacturer
Condition Code Used in working condition
UOM Lot
Quantity 0
Division AEP - SWEPCO
Equipment Location DOLET HILLS POWER PLANT - Mansfield , LA
Manufacturer P/N
Capacity
Condition Code Used in working condition
Short Equipment/Material Description Temporary Conveyor System With Pad Mount Transformer

AEP SURPLUS EQUIPMENT

Temporary Conveyor System With Pad Mount Transformer

Conveyor Section #TC1

BW - 42 In
Lenth - 126 Ft
Lift - 6.5
Angle - 2.95

Belt Spec - 3 Ply / 330 Piw

Motor
HP - 60
RPM - 1775
Voltage - 460
Frame Size - 364T

Reducer - Dodge TDT7 
GB Ratio - 25.18 
Sheave Dia. Driving - 11.5
Sheave Dia. Driven - 9
V-Belt - 5VX1030

Drive Pulley Diameter (Dia over lagging) - 20

Idler Trough Angle - 35

ACTUAL MEASUREMENTS - VALIDATION
Time for One full Revoultion (secs) - 29
Actual Length (feet) - 125.5
Calculated Belt Speed (FPM) - 519

Belt Speed Measured 7-20-17 - 530
 
Conveyor Section #TC2

BW - 42 In
Lenth - 90 Ft
Lift - 2.4
Angle - 1.5

Belt Spec - 3 Ply / 330 Piw

Motor
HP - 25
RPM - 1760
Voltage - 460
Frame Size - 284T

Reducer - Dodge TXT7A 
GB Ratio - 15.23 
Sheave Dia. Driving - 5
Sheave Dia. Driven - 6
V-Belt - 5VX900

Drive Pulley Diameter (Dia over lagging) - 19

Idler Trough Angle - 35

ACTUAL MEASUREMENTS - VALIDATION
Time for One full Revoultion (secs) - 21.6
Actual Length (feet) - 90
Calculated Belt Speed (FPM) - 500

Belt Speed Measured 7-20-17 - 500

Conveyor Section #TC3

BW - 48 In
Lenth - 63 Ft
Lift - 8.3
Angle - 7.5

Belt Spec - 3 Ply / 330 Piw

Motor
HP - 20
RPM - 1765
Voltage - 460
Frame Size - 256T

Reducer -  Cleveland CGSMU525
GB Ratio -  25.18
Sheave Dia. Driving - n/a
Sheave Dia. Driven - 9.5
V-Belt - n/a

Drive Pulley Diameter (Dia over lagging) - 18

Idler Trough Angle - 20

ACTUAL MEASUREMENTS - VALIDATION
Time for One full Revoultion (secs) - 16
Actual Length (feet) - 63
Calculated Belt Speed (FPM) - 473

Belt Speed Measured 7-20-17 - 475

Conveyor Section #TC4

BW - 60 In
Lenth - 135 Ft
Lift - 3.3
Angle - 1.4

Belt Spec - 3 Ply / 330 Piw

Motor
HP - 100
RPM - 1775
Voltage - 460
Frame Size - 404/5T

Reducer -  Dodge TA10507H25
GB Ratio - 25.18 
Sheave Dia. Driving - 11
Sheave Dia. Driven - 21.5
V-Belt - 5VX950

Drive Pulley Diameter (Dia over lagging) - 37

Idler Trough Angle - 35

ACTUAL MEASUREMENTS - VALIDATION
Time for One full Revoultion (secs) - 48
Actual Length (feet) - 135
Calculated Belt Speed (FPM) - 338

Belt Speed Measured 7-20-17 - 359

Transformer - Three Phase Pad Mount 

Manufacturer - General Electric
MFG Date - Jan 1985
Serial Number - N667689
KVA - 750
Type - 13800GRDY/7970-480Y/277
Qty - 1

Additional Photos Included In Attachment 1
Conveyor Material List & Specs In Attachment 2

Quantity: 1 lot (Lot includes four(4) conveyor sections and one(1) transformer)

Location:  This item is located near Pelican, LA

Condition:  Used working condition

Description: No Known Concerns

To schedule an inspection or for additional information contact Kayne Martin at 318-461-9536 

NOTE: Disassembly & work to be performed on site must be performed by a contractor satisfying MSHA requirements.
   
Known Concerns: See Description for concerns. 

(Listed concerns are what have been observed by the business unit selling the item and have not been validated by a technician.  Areas not listed as known concerns or None do not imply any warranty as to life or condition and only imply that a concern was not noticed by the previous user.  This item is being sold AS IS WHERE IS in its existing condition.) 

Conditions for sale of AEP Surplus Equipment / Material:

~ All Items are sold AS IS WHERE IS.  No warranty given or implied.
~ Inspections are on the potential buyers time and expense and must be scheduled in advance.
~ Test operation of the item will not be permitted.
~ Buyer will be required to sign a Bill of Sale and pay any applicable taxes.
~ After payment clears,  the buyer can arrange for pick up.
~ Buyer must present a copy of the pickup release at the time of pickup.
~ Buyer shall have appropriate hauling equipment for the item(s) being picked up.
~ Buyer is responsible for positioning  and securing the item(s) on the transport vehicle.
~ If applicable AEP branding decals will be removed prior to the sale.

Product Attachment Documents Attachment
Attachment

View new and used equipment that AEP no longer needs.

Find Equipment

Place a bid or make an offer on available equipment.

How to Buy Equipment

Create your user account and sign up to participate.

Register Now