90 MVA Transformer (SOLD)
Auction ID
29
Status
Closed
Type
Standard (PQT)
Started
2/10/2009 6:55 AM EST
Ended
2/12/2009 1:00 PM EST
Quantity
0
Minimum Bid Increment
$100.00
Manufacturer
Westinghouse
Division
AEP - PSO
Equipment Location
COMANCHE STATION
- LAWTON
, OK
Details
Serial Number
7001867
Asset ID
08C-220A
Manufacturer
Westinghouse
Volts
138. kV / 13.8 kV
HZ
60 Hz
Amps
Low side 3765 amps
Phase
3
Capacity
90 MVA
UOM
Lot
Condition Code
Used needs repairs
One (1) Transformers
Westinghouse 138. kV / 13.8 kV Transformer
- 90-MVA
- Oil with fans cooled
- Model year appears to be 1972
- Windings are believed to be copper
- The transformer was recently taken out of services. Gas bubbles were found in the oil tests. October 25, 2007 test report is in the attachment.
- Transformer Oil test taken 10/21/2008 indicate PCB <1
Drawings are available
See attachment for nameplate details.
The unit is being sold "as is where is".
Message Subject : Clarifications
Message :
~ The transformer lid is bolted.
~ All individuals working on AEP premises must have the OSHA 10 hr. safety course and supervisors will need the 40 hr. course.
~ The oil is still in the transformer and is included at "NO-CHARGE" for use or disposal by the buyer.
~The windings are "DEFINITELY" copper.
~It is acceptable to completely dismantle the transformer on site. All materials related to this are the responsibility of the buyer. It is expected that it will be completed in a timely manner. The buyer should be aware this includes all oils and debris associated with this unit . Oils must be properly contained and disposed of off the site. Site safety requirements must be complied with and insurance requirements stated in the Terms and Conditions.
AUCTION HAS BEEN RESTARTED DUE TO A BID SUBMITTION ERROR.
Westinghouse 138. kV / 13.8 kV Transformer
- 90-MVA
- Oil with fans cooled
- Model year appears to be 1972
- Windings are believed to be copper
- The transformer was recently taken out of services. Gas bubbles were found in the oil tests. October 25, 2007 test report is in the attachment.
- Transformer Oil test taken 10/21/2008 indicate PCB <1
Drawings are available
See attachment for nameplate details.
The unit is being sold "as is where is".
Message Subject : Clarifications
Message :
~ The transformer lid is bolted.
~ All individuals working on AEP premises must have the OSHA 10 hr. safety course and supervisors will need the 40 hr. course.
~ The oil is still in the transformer and is included at "NO-CHARGE" for use or disposal by the buyer.
~The windings are "DEFINITELY" copper.
~It is acceptable to completely dismantle the transformer on site. All materials related to this are the responsibility of the buyer. It is expected that it will be completed in a timely manner. The buyer should be aware this includes all oils and debris associated with this unit . Oils must be properly contained and disposed of off the site. Site safety requirements must be complied with and insurance requirements stated in the Terms and Conditions.
AUCTION HAS BEEN RESTARTED DUE TO A BID SUBMITTION ERROR.
Product Attachment Documents
Attachment 1
Attachment 2
Attachment 2
Product Photos
